Aluminum Tape With and Without Liner
3.0 mil dead soft aluminum foil tape with and without liner with aggressive pressure-sensitive acrylic adhesive. Provides instant, water-resistant adhesion to clean, dry surfaces. Adheres well to itself (where overlapped) yet dispenses from the roll for easy application. Conforms to irregular/curved surfaces as it remains flexible and resists cracking and lifting. Also UV resistant. Recommended minimum application temperature: 35ºF.
Product Application
Aluminum masking tape with and without liner for chemical paint stripping of aircraft and use as underlay for PMB Blast Tape (drystripping process). Aluminum tape with and without liner also can be used for electroplating (of aluminum), heat reflection/dissipation and to seam and seal fiberglass duct board, sheet metal ductwork, and flexible duct wrap to enhance appearance and maintain vapor barrier integrity. Other functions include HVAC (Heating, Ventilation, and Air Conditioning) and other Aerospace, Industrial, Marine and Appliance industry applications.
GOVERNMENT COMPLIANCE
BAC D6-34501, Rev. H
SAE-AMS-T-23397B. UL-723.
2″ aluminum tape is a standard stock item.
Other sizes and specifications are available upon request. See specifications below:
Aluminum tape with and without liner 2 mil dead soft high tensile aluminum foil coated with an aggressive solvent based acrylic adhesive; removable paper liner. Malleable foil conforms well to irregular and curved surfaces; and will perform well at both low and elevated temperatures. Can be applied at low temps. Used for vapor barrier protection, waterproof sealing, heat reflection & dissipation, masking in paint stripping and electroplating.
Total Thickness: 3.6 mil.
Peel Adhesion: 73 oz/in.
Tensile: 17.1 lbs/in.
Elongation: 3.5%.
Temperature Range: -22°F to 248°F. 3” neutral core.
Please contact us with your requirements and we will provide pricing and / or additional information.
