Disc Filters

The Mefiag disc filters chamber is constructed of all polypropylene with bottom inlet and bottom discharge. Discharge is o-ring sealed. A powder coated support plate provides added strength. Chamber’s have side mounted inlet/outlet connections for closer mounting to the tank.

Stainless steel eyebolts with handwheels hold the powder coated steel cover in place. An air release diaphragm valve is provided.

A stainless steel pressure gauge (0-60 PSI) is supplied with a corrosion resistant guard.

Base is polypropylene with stainless steel channel structure and polypropylene feet. Casters are available upon request.

Unitized Pack

The disc assembly is all polypropylene with threaded center core and top nut for locking the discs into a one-piece unitized pack. Bottom support plate is designed for uniform liquid distribution while the top support plate provides for recirculation of the liquid to the filter media.

A locking/lifting handle is furnished to secure the lock nut into place and to facilitate the easy removal and replacement of the unitized pack.

Filter media selected for the application is placed between the rigid polypropylene discs. Ten (10) micron cellulose is standard. Carbon/cellulose (10 micron) and polypropylene of various
densities are available.

Self-Priming Magnetic Drive Pump

A polypropylene, self-priming magnetic drive pump Mefiag Model PMSP is furnished with a TEFC motor. High purity silicon carbide bearings and viton o-rings are standard. The magnetic switch motor starter is housed in a liquid tight enclosure.

Disc Filters Slurry Tank

The slurry tank is all polypropylene construction and is furnished with Mefiag Model PPQ-SY units. Disc filters slurry tanks are used to facilitate pre-coating, addition of carbon (if required), and solution makeup.  These are sized to store the complete capacity of the filter chamber during changing of the media or maintenance. Inlet/outlet connections are located at the end of the mounting base.

Piping, Valves and Connections

Piping, valves, and connections are all hard pipe polypropylene. SY models are piped to allow for flow from the solution tank, slurry tank, and the filter chamber.

    Please contact us with specifications and/or to request information or technical data sheets.